The dishes are
not drying
Wrong program has
been selected.
With a short program, the washing
temperature is lower, decreasing
cleaning performance. Choose a
program with a long washing time.
Use of cutlery with a
low-quality coating.
Water drainage is more difficult with
these items. Cutlery or dishes of this
type are not suitable for washing in
the dishwasher.
Error
codes
When some malfunctions come on, the appliance will display error codes to
warn you:
Codes Meanings Possible Causes
Longer inlet time.
Not reaching required
temperature
A flow meter, drain valve, or pump failure,
it should be repaired by a qualified worker.
Heating tube or thermistor anomaly, it
should be repaired by a qualified worker.
Overflow. Some element of dishwasher leaks.
Touch button adhesion
Communication anomaly
Water tank float
Water or other material in the key area
causes E9 or it should be repaired by a
qualified worker.
It should be repaired by a qualified worker.
It should be repaired by a qualified worker.
Water tank float anomaly It should be repaired by a qualified worker.
WANING
If overflow occurs, turn off the main water supply before calling a service.
If there is water in the base pan because of an overfill or small leak,
the water should be removed before restarting the dishwasher.
anomaly
To Next Page
Loading...
