Issue 2 26/11/2019 9
CLEANING
To maximize the efficiency of the coffee maker, clean and
descale regularly
1. Switch off and unplug the coffee maker and allow it to cool
completely.
2. Lift the lid, remove and empty the mesh filter and place the
glass jug onto the hotplate.
3. Descale with a proprietary descaler suitable for plastic coffee
makers and use in accordance with the instructions on the
pack. Alternatively half fill the coffee maker with water and
add the juice of one lemon. Close the lid, switch on and allow
the coffee maker to transfer some of the descaling solution
before turning the coffee maker off and allowing it to stand
for 15 minutes. Repeat this last step a further two times
before discarding the solution.
4. After descaling, fill the coffee maker to the maximum level
with clean water, close the reservoir lid and allow the coffee
maker to work. Do not use a paper filter and discard the hot
water after it is finished. Repeat this step a second time.
5. Wash loose parts (mesh filter, filter holder, glass jug and jug
lid) in hot water with a little washing up liquid. Rinse and dry
thoroughly. Not suitable for the dishwasher.
6. Wipe external surfaces with a soft damp cloth and dry
surfaces with a soft dry cloth. Do not use detergent or
abrasives as these may scratch the surface. Never immerse
in water.
To Next Page
Loading...
Need help?
General
