The Cookworks Brushed Stainless Steel Kettle, model KE01402E-GS, is a household appliance designed for boiling water. It features a sleek brushed stainless steel body, a handle, a spout, a water gauge, a lid with a lid button, a handle cover, a switch, and a base.
Function Description:
The kettle's primary function is to heat water for domestic use. It operates by placing it on its base, filling it with water, and activating the switch. The internal heating element brings the water to a boil, after which the kettle automatically switches off. It is designed for indoor use only and is not suitable for commercial applications.
Important Technical Specifications:
- Model No.: KE01402E-GS
- Rated Voltage & Frequency: 220 - 240V AC 50-60Hz
- Rated Power Input: 1850-2200W
- Capacity: 1.7 litres (approximately 6 cups)
- Class Rating: 1 (earthed)
- BS 1362 Fuse: 10A
- Product Dimensions (external): 226 x 154 x 242mm
- Product Weight (net): Approximately 1 kg
- Safety Features: Automatic shut-off when water boils, boil-dry protection (switches off if inadvertently switched on when empty or boils dry).
Usage Features:
- Placement: The kettle should be placed on a stable, flat, heat-resistant surface, away from areas that may be damaged by steam.
- Power Connection: Fully unwind the cable and plug it into a 220V-240V AC, 50Hz earthed socket outlet. Ensure the cable does not dangle over the edge of units for safety.
- Filling: Remove the kettle from its stand. Open the lid by pressing the lid button. Fill the kettle with water, using the clear water gauge as a guide. Do not fill past the maximum (1.7 litres / 6 cups) or below the minimum (0.75 litres / 3 cups) level.
- Lid Closure: Close the lid fully until it clicks, ensuring it is secure.
- Activation: Ensure the switch is in the off position (lifted up) before placing the kettle back on the stand. Turn the kettle so the spout faces away from you. Press the switch downwards to turn the kettle on. A blue power indicator lamp in the switch will illuminate, indicating operation.
- Automatic Shut-off: The kettle will automatically switch off once the water boils, and the indicator light will extinguish.
- Manual Interruption: To stop or interrupt the boiling process, lift the switch up before removing the kettle from the stand.
- First Use: Before initial use, fill the kettle to the maximum level, boil the water, and then discard it. Repeat this step once more to ensure cleanliness.
- Boil-Dry Protection: The kettle is equipped with a safety device that automatically switches off the heating element if it is switched on when empty or if it boils dry. In such cases, allow the kettle to cool completely for a minimum of 15 minutes before refilling with cold water. The kettle will then resume normal operation.
- Safety Precautions:
- Do not open the lid while water is boiling or steam is escaping.
- Do not cover the kettle during use. Allow it to cool fully before storing.
- The surfaces of the kettle become hot during use; avoid touching them and always carry the kettle by its handle.
- The kettle and heating element are subject to residual heat after use.
- Do not use the kettle near or under heat-sensitive surfaces or those that may be damaged by steam.
- Do not overfill the kettle, as boiling water may be ejected during operation.
- Use only with the provided stand and exclusively for heating water. Misuse can cause personal injury.
- Keep the appliance and its cord out of reach of children under 8 years old.
- Children aged 8 and above, and persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, can use the appliance if supervised and instructed on safe use, understanding the hazards involved. Children should not play with the appliance.
- Cleaning and user maintenance should not be performed by children unless they are over 8 and supervised.
- Keep the stand, cable, plug, and outside of the kettle dry. Avoid spillage on the connector. Never immerse the kettle in water.
- Do not pull on the cable to disconnect from the mains supply.
- Do not operate the appliance if it is damaged or malfunctions. If the supply cord is damaged, it must be replaced by a qualified service engineer with an approved part to avoid hazards.
- Ensure the plug is accessible and the socket is within easy reach of the power cord.
Maintenance Features:
To maximize efficiency, the kettle should be cleaned and descaled regularly.
- Preparation: Switch off, unplug the kettle, and allow it to cool completely.
- Filter Removal: Press the lid release button to open the lid. Slide out the filter located inside the spout.
- Filter Cleaning: Clean the filter under running tap water, gently brushing it with a soft nylon brush to remove any scale build-up.
- Descaling:
- Proprietary Descaler: Use a descaler suitable for kettles, following the instructions on the product packaging.
- Natural Descaler: Alternatively, half-fill the kettle with water and add the juice of one lemon. Boil the kettle and let it stand for 15 minutes. Repeat this boiling and standing process two more times before discarding the solution.
- Post-Descaling Rinse: After descaling, fill the kettle to the maximum level, boil the water, and then discard it to rinse out any descaling residue.
- Filter Refitting: Support the filter with your fingers and fit the bottom of the filter into the clip at the base of the spout. Then, clip the top of the filter under the top lip of the spout.
- External Cleaning: Wipe the external surfaces of the kettle with a soft, damp cloth. Do not use detergents or abrasive cleaners, as these may scratch the surface.
Recycling Electrical Products:
The kettle bears a symbol indicating that it should not be disposed of with normal household waste. It should be taken to a suitable facility for disposal when it reaches the end of its life. For information on local recycling sites, users can visit www.recycle-more.co.uk and use the "bank locator" by entering their postcode.
Plug / Wiring Advice:
The mains lead wires are colored according to UK electrical code:
-
BLUE = NEUTRAL
-
BROWN = LIVE
-
GREEN + YELLOW = EARTH
-
Non-rewireable Plug: If the appliance has a non-rewireable plug and the fuse needs changing, the fuse cover must be refitted. If the fuse cover is lost or damaged, the appliance must not be used.
-
Rewireable Plug: If the appliance has a rewireable plug, and the wire colors do not match the terminal markings, the plug should only be replaced by a suitably competent person or a qualified electrician.
- The BLUE wire connects to the terminal marked N.
- The BROWN wire connects to the terminal marked L.
- The GREEN & YELLOW wire connects to the terminal marked E or with the earth symbol.
The product is manufactured in China for Argos Limited, with contact details provided for customer support in the UK and Ireland. It comes with a 1-year product guarantee against manufacturing defects from the date of original purchase, subject to specific provisions regarding accidental damage, misuse, correct installation, domestic use, and expert repair.
Need help?
To Next Page
General
