Issue 1 29/6/2017 11
Cleaning
To maximize the efficiency of the steamer, clean after each use and
descale regularly (every 7 – 10 uses).
1. Switch off and unplug the steamer and allow it to cool
completely
2. Remove all loose parts (steamer bowls, rice bowl, drip tray and
cover) and wash these parts in hot water with a little washing up
liquid. Rinse and dry thoroughly.
3. Empty any residual water from the base and wipe the internal
and external surfaces of the steamer base with a soft damp cloth
soaked in soapy water. Rinse and dry surfaces with a soft dry
cloth. Do not use detergent or abrasives as these may scratch
the surface. Never immerse the steamer base in water.
4. Descale with a proprietary descaler suitable for steamers and
use in accordance with the instructions on the pack.
Alternatively add the juice of one lemon to the water reservoir
and top up with clean water to the MAX fill mark. Fit the drip
tray, lower bowl and lid onto the steamer base. Plug into the
mains supply and set the timer for 20 minutes. Allow the
steamer to stand for 15 minutes before repeating this last step a
further time.
5. After descaling, fill steamer to the MAX level, bring to the boil
and then discard water.
Technical specification
Rated voltage 220-240V AC 50Hz
Power consumption 800W
Class rating I (Earthed)
BS 1362 fuse 13A
Capacity 9 litre
To Next Page
Loading...
