Coolpad Surf Instructions

Coolpad Surf Mobile Hotspot
Turn on
1. Press the Power button on the mobile hotspot until all four indicators
momentarily flash blue.
2. Wait for the Network and Wi-Fi Indicators to come on, one at a time.
3. When the Network and Wi-Fi icons light up blue, the Wi-Fi connection is
enabled.
Turn off
1. Press the Power button on the mobile hotspot until all four indicators
momentarily flash blue.
2. When all four buttons go dark, the Network and Wi-Fi connections have
been disabled.
Connect to the Mobile HotSpot
To connect your Wi-Fi enabled device to your Mobile Hotspot for internet access,
follow these steps:
1. Make sure your Mobile Hotspot is turned on.
2. Select the Wi-Fi Network Name (SSID).
3. Enter the Wi-Fi Password.
Charging Your Mobile Hotspot
1. Connect the microUSB end of the USB cable to the USB port on your device.
2. Connect the other end to the travel adapter.
3. Connect the travel adapter to an electrical outlet to fully charge your
device.
Note: You can also charge the device by connecting it to a computer with the USB
cable.

Coolpad Surf Specifications

General

Network Technology	4G LTE
Wi-Fi Standards	802.11 b/g/n
Max Connected Devices	10
Type	Mobile Hotspot
Max Theoretical Downlink Speed	150 Mbps
Max Theoretical Uplink Speed	50 Mbps
Security	WPA2
Frequency Band	2.4 GHz
Antenna	Internal
Ports	Micro USB
SIM Card Slot	Yes