Cooluli CONCORD-20LDX - Getting Started; Plugging in Your Unit

Getting Started
Before plugging in your unit, make sure there is a minimum 2" vent clearance
for proper ventilation.
5
For home application: use the supplied AC power cord (see Fig. 2) by inserting AC
connector into unit’s AC port (see Fig.
5) and inserting AC plug into wall outlet. This
unit works on 100-240V (in compliance with North American and E
U/UK
standards).
For motor vehicle application: Car engine MUST be turned on first before plugging
in the cooler/warmer. This precaution prevents a power surge that can lead to the
unit overheating and/or becoming a potential fire risk. Use the supplied DC power
cord (see Fig. 3) and insert DC connector into unit’s DC port (see Fig. 5) and the DC
plug into the appropriate cigarette-lighter outlet.
!
CAUTION:
KEEP VENTS CLEAR
A MINIMUM of 2”
Fig. 5
Fig. 6
Vents
DC PORT
AC PORT
!
CAUTION:
KEEP VENTS CLEAR
A MINIMUM of 2"
AC POWER CORD
AC CONNECTOR
AC PLUG
DC CONNECTOR
DC PLUG
DC POWER CORD
1.
Plugging in your unit
100-
240V
100-
240V