EasyManua.ls Logo

Cooper & Hunter CH-S12FHCP - User Manual

Cooper & Hunter CH-S12FHCP
60 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
SERVICE MANUAL
Wall Mounted Type
DC Inverter
Model No.
This service information is designed for experienced repair technicians only and is not designed for use by the general public.
It does not contain warnings or cautions to advise non-technical individuals of potential dangers in attempting to service a product.
Products powered by electricity should be serviced or repaired only by experienced professional technicians. Any attempt to service or
Repair the product or products dealt with in this service information by anyone else could result in serious injury or death
WARNING
VersionV1 Date2017-01-24
CH-S12FHCP
Question and Answer IconNeed help?

Do you have a question about the Cooper & Hunter CH-S12FHCP and is the answer not in the manual?

Summary

Introduction

Model Name Explanation

Explains the alphanumeric code of the model number.

Safety Cautions

Details critical safety warnings and cautions for repair and operation.

Inspection after Repair

Outlines checks and procedures to perform after the repair is completed.

Using Icons

Explains the meaning and usage of icons throughout the service manual for clarity.

Using Icons List

Provides a detailed list and explanation of icons used in the manual.

Specifications

Nominal Distribution System Voltage

Specifies voltage, frequency, and phase requirements for the system.

Nominal Capacity and Nominal Input

Details the cooling/heating capacity and power input values.

Technical Specifications-Unit

Lists dimensions, weight, and sound levels of the unit.

Electrical Specifications

Provides details on running current and starting current.

Technical Specifications-Parts

Lists specifications for key components like compressor, fan, and heat exchanger.

Technical Specifications-Others

Details refrigerant type, charge, piping, and other technical parameters.

Sensors list

Lists the types, descriptions, and quantities of sensors used in the unit.

Piping diagrams

Cooling mode

Shows the piping schematic for the cooling operational mode.

Heating mode

Shows the piping schematic for the heating operational mode.

Operation range

Cooling Operation Range

Graphical representation of cooling operation range based on indoor/outdoor temperatures.

Heating Operation Range

Graphical representation of heating operation range based on indoor/outdoor temperatures.

Printed circuit board connector wiring diagram

Control PCB Connectors

Lists connectors and their functions for the control PCB.

Module PCB Connectors

Lists connectors and their functions for the module PCB.

PCB Notes and Designations

Provides additional notes on fuses, LEDs, and varistors for PCBs.

Control PCB Diagram

Diagram showing component layout and connector locations for Control PCB.

Module PCB Diagram

Diagram showing component layout and connector locations for Module PCB.

Wiring Diagrams

Outdoor Unit Wiring Diagram

Shows the electrical connections for the outdoor unit.

Optional Parts Remark

Notes optional components in the wiring diagram.

Functions and control

Compressor Frequency Control

Details compressor frequency control, starting, and speed adjustments.

Outdoor Fan Control

Explains how the outdoor fan speed is controlled based on temperature.

Electronic Expansion Valve (EEV) Control

Describes the control logic for the outdoor EEV in cooling and heating modes.

Four Way Control

Details the operation and control of the four-way valve.

Protection Functions

Covers various protection mechanisms like temperature and current limits.

Thermistor Values

Provides resistance values for ambient, defrosting, and pipe sensors at different temperatures.

Dimensional drawings

Outdoor Unit Dimensions

Shows the physical size and measurements of the outdoor unit.

Center of gravity

Outdoor Unit Center of Gravity

Illustrates the location of the center of gravity on the outdoor unit.

Service Diagnosis

Caution for Diagnosis

Important warnings and advice before starting diagnostic procedures.

Primary Electronic Appliance Parameters

Lists key parameters for compressor, fan motor, reactor, and 4-way valve.

Problem Symptoms and Measures

Lists common operational issues and recommended troubleshooting steps.

Error Codes and Indoor Display Descriptions

Lists error codes displayed on the indoor unit and their meanings.

Thermistor or Related Abnormality

Details troubleshooting for sensor failures and provides a flowchart.

EEPROM Abnormal

Explains troubleshooting for EEPROM errors on indoor or outdoor mainboards.

Indoor AC Fan Motor Malfunction

Provides troubleshooting steps for indoor AC fan motor issues.

Outdoor DC Fan Motor Fault

Details troubleshooting for outdoor DC fan motor failures.

IPM Protection

Explains troubleshooting for IPM protection faults related to the compressor.

Over-current of the Compressor

Addresses issues related to excessive current draw by the compressor.

Communication Fault between IPM and Outdoor PCB

Guides on diagnosing communication errors between IPM and outdoor PCB.

Power Supply Over or Under Voltage Fault

Troubleshooting steps for power supply voltage issues detected by the unit.

Overheat Protection For Discharge Temperature

Diagnoses and resolves overheat protection triggered by discharge temperature.

Communication Fault between Indoor and Outdoor

Troubleshooting for communication failures between indoor and outdoor units.

Loss of Synchronism Detection

Addresses issues with compressor rotor position detection in inverter units.

High Work-Intense Protection

Explains high work-intensity protection triggered by heat exchanger thermistor readings.

Performance and curves diagrams

Cooling Capacity-Temperature Curves

Shows how cooling capacity varies with indoor and outdoor temperatures.

Cooling Power Consumption Curves

Illustrates power consumption changes with varying temperatures.

Cooling Suction Pressure Curves

Displays suction pressure trends across different temperature conditions.

Cooling Discharge Pressure Curves

Shows discharge pressure variations based on temperature.

Heating Capacity-Temperature Curves

Illustrates heating capacity changes with indoor and outdoor temperatures.

Heating Power Consumption Curves

Shows how heating power consumption varies with temperatures.

Heating Discharge Pressure Curves

Displays heating discharge pressure based on temperature conditions.

Heating Suction Pressure Curves

Presents heating suction pressure data against temperature.

Circuit diagram

Outdoor Unit Control Board Circuit Diagram

Detailed electrical schematic of the outdoor control board.

Module Board Circuit Diagram

Electrical schematic for the module board, showing its components and connections.

Cooper & Hunter CH-S12FHCP Specifications

General IconGeneral
BrandCooper & Hunter
ModelCH-S12FHCP
CategoryAir Conditioner
LanguageEnglish

Related product manuals