Why is my Cooper & Hunter Air Conditioner overloaded?
Your Cooper & Hunter Air Conditioner might be overloaded due to an unstable supply voltage or poor radiating, causing the system to overload. To resolve this, check the voltage of the power supply and inspect the system for radiating issues.
What to do if there is a wiring issue with the mainboard and wifi module in Cooper & Hunter Air Conditioner?
If you're experiencing wiring issues with the mainboard and Wi-Fi module in your Cooper & Hunter Air Conditioner, it could be due to a loosened or poorly contacted wiring terminal, or a faulty mainboard or Wi-Fi module. First, check the wiring terminal. If the issue persists, inspect the mainboard and Wi-Fi module, and replace any defective components.
Enables or disables the child lock feature using button combinations on the remote.
Switches the temperature display between Celsius (°C) and Fahrenheit (°F).
Configures the heating mode for operation at low ambient temperatures.
Instructions for cleaning the indoor unit and remote control with appropriate materials.
Steps to prepare the unit for long periods of non-operation.
Essential checks to perform before operating the air conditioner.
Detailed guide on how to remove, clean, and re-install the air filter.
General| Heating Capacity | 13, 000 BTU |
|---|---|
| SEER Rating | 20 |
| Refrigerant | R410A |
| Power consumption (heating) | 1.05 kW |
| Energy efficiency class (cooling) | A++ |
| Energy efficiency class (heating) | A++ |
| Type | Split System |
| Cooling Capacity | 12000 BTU |
| Voltage | 220-240V |
| Indoor unit noise level | 26 dB |
| Power Supply | 220-240V |
| Noise Level (Outdoor) | 52 dB |
| Operating Temperature (Heating) | -15°C to 24°C |
To Next Page
