Modbus Gateway(Mini)
2
2 User Notice
Dear customer：
Please read this manual carefully prior to installation and operation and strictly
observe all installation and operation instructions covered in the manual.
WARNING!
（1） Installation shall be performed by the qualified personnel; otherwise it would result in
a fire hazard or electric shock.
（2） Do not place the plug of the power supply into the socket before it is dried and
cleaned.
（3） Cut off the power supply before touching the electric element.
（4） Do not touch this device with wet hands; otherwise it would result in electric shock.
（
）
Do use the power cable specified in this manual; otherwise it would result in a fire
hazad.
（
）
When the power cable is reversely connected or the power supply is beyond the
rated range, it would result in a fire hazard or even damages to this device.
（
）
Do install this device inside the electric control cabinet which is located indoor and
then is locked.
（8） Do install this device where it will not be subject to the electromagnetic interference
or heavy dust.
To Next Page
Loading...