Need help?Do you have a question about the Cooper Menvier Scantronic 9751 and is the answer not in the manual?
Introduces various methods for setting the alarm system, covering different operational scenarios.
Describes setting only specific areas of the premises while others remain active.
Introduces the process of disarming the alarm system, with a warning about potential intruders.
Details disarming the system using the main keypad and entry time.
Details the special code for silent alarm notification during forced unsetting.
Explains how to disarm the system after an alarm has occurred.
Outlines the different methods for resetting the alarm system after an alarm event.
Explains how a user can reset the system from the keypad after an alarm.
Explains temporarily excluding specific detectors from being armed during setting.
Covers managing user access codes, security, and default codes for the system.
Details the special code for silent alarm notification during forced unsetting.
Explains how to perform system tests, including Bell Test and Walk Test.
General| Input Voltage | 230V AC |
|---|---|
| Battery Backup | 12V 7Ah |
| Part Set Suites | 4 |
| Compatibility | Scantronic 9000 Series |
| Zones | Wired |
| Humidity | Up to 85% non-condensing |
| Operating Temperature | -10°C to 55°C |
To Next Page