Need help?Do you have a question about the Cooper Menvier 9651 and is the answer not in the manual?
Overview of the 9651 alarm system components and functionality.
Details on the 9930 LCD remote keypad functions and operation.
Explains the structure and content of the user guide.
Indicators to check if the alarm system is functioning correctly.
Describes various methods for arming the alarm system.
Explains how to set the system after a programmed exit time.
Details setting the system upon closing the last door without a fixed exit time.
How to use an external button to complete the system setting sequence.
Procedure for arming specific areas of the premises.
How the system sets immediately upon key press for certain areas.
Method of arming the system using a physical keyswitch.
Using a special lock to complete the system setting sequence.
Troubleshooting steps when the system fails to arm.
Explains how an active detector prevents the system from setting.
Identifies system faults indicated by the service lamp and beep.
Actions to take when service and line fault lamps are illuminated.
Procedures for disarming the alarm system.
How to disarm the system using a keyswitch.
Steps to disarm the system using the keypad and access code.
Disarming the system via a lock switch on the exit door.
Information on what happens if the entry time is exceeded.
How to manually trigger Panic, Medical Assistance, or Fire alarms.
Using a special code to disarm discreetly while alerting authorities silently.
Procedure to follow in case of a fire alarm.
Steps to silence the alarm and disarm the system.
Methods for resetting the alarm system after an event.
How a user can reset the system after an alarm.
Process for resetting the system remotely with assistance.
How to temporarily disable specific detectors from triggering alarms.
Information on managing user access codes for system security.
Steps to modify existing user access codes.
How to assign or change descriptive names for user codes.
Using proximity tags as an alternative to access codes.
Procedure for programming a new proximity tag into the system.
Steps to remove a proximity tag and its associated access code.
How to access and view the system's event log.
Instructions for updating the system's internal clock and calendar.
How to enable or disable the chime feature for door openings.
Procedures for testing system components and detectors.
How to test the sounders and strobe operation.
Method for testing individual detectors by triggering them.
General| Brand | Cooper Menvier |
|---|---|
| Model | 9651 |
| Category | Control Panel |
| Language | English |
To Next Page