Need help?Do you have a question about the Cooper Security M800 and is the answer not in the manual?
Describes the components of the intruder alarm system, including control unit, sounder, and ARC connection.
Explains the use of numeric codes or proximity tags to operate the alarm system.
Describes telecommands as remote control devices for setting and unsetting wards.
Details the function and features of alarm system keypads, including tag readers.
Explains the display, indicators, keys, and flap of the alarm system keypad.
Details the steps required to set the alarm system or individual wards.
Instructions for setting an additional ward when one is already set.
Explains how to set groups of wards using the keypad.
Guides users on how to unset the alarm system, with different steps if a sounder is active.
Details the process for unsetting a specific ward group.
Explains how to silence audible alarms using user codes or proximity tags.
Describes how to review and clear alert messages after an alarm event.
Details the steps to obtain a remote reset code from an Alarm Receiving Centre.
Explains special functions like silent duress alarms or isolating zones via user codes.
Describes how to activate a panic alarm using specific key combinations.
Explains how to set the alarm system using the telecommand buttons.
Details how to unset the alarm system using the telecommand.
Addresses issues when trying to set the system with active zones.
General| Brand | Cooper Security |
|---|---|
| Model | M800 |
| Category | Control Panel |
| Language | English |
To Next Page
