Need help?Do you have a question about the Cooper Security M2000 and is the answer not in the manual?
Provides an overview of the alarm system's components and connection to an ARC.
Explains user codes and proximity tags for system operation.
Describes telecommands as remote control devices for setting/unsetting.
Details the function and features of alarm system keypads.
Covers keypad display functionality, power, and function indicators.
Details keypad buttons, controls, and the protective flap.
Explains what zones are, how they are numbered, and named.
Describes how zones are grouped into wards for independent control.
Guides users through the process of arming the security system.
Explains how to set more than one ward on the alarm system.
Details the procedure for setting groups of wards simultaneously.
Provides instructions on how to disarm the alarm system.
Explains how to disarm specific ward groups.
Guides users on how to silence audible alarms from the system.
Explains how to clear alert messages and reset the alarm system.
Describes the process of getting a remote reset code from an ARC.
Details functions associated with special user codes, like duress or panic.
Explains how to activate a panic alarm using keypad combinations.
Details how to operate the alarm system using a telecommand remote.
Instructions for setting the system using the telecommand buttons.
Instructions for unsetting the system using the telecommand button.
Addresses issues encountered when trying to set the system with active zones.
Explains the meaning and resolution of the single error tone.
Explains the high, rapid, repeating tone indicating active zones.
Indicates a zone alarm has occurred, showing zone number, time, and date.
Reports faults on the telephone line, potentially preventing system setting.
Covers AC mains power loss and standby battery faults, impacting system operation.
Alerts for control unit lid or auxiliary device tampering, requiring professional attention.
Alerts for external sounder tampering and zone tamper circuits.
Reports failures during system test routines, advising contact with the alarm company.
Indicates when an engineer or remote code is needed for system reset.
Alerts for routine maintenance, hardware changes, or keypad lockouts.
Informs about auto-setting, engineer presence, or system busy status.
Explains 'cannot set' messages due to various tamper and equipment faults.
Details 'cannot set' messages related to power outages or phone line issues.
Describes the 'cannot set' message when the keypad is locked out.
General| Brand | Cooper Security |
|---|---|
| Model | M2000 |
| Category | Control Panel |
| Language | English |
To Next Page
