13
Silencing an Alarm
If an alarm has occurred and you want to
silence the sounders:
1. Enter your user code or present your
proximity tag. This silences both the
internal and external sounders.
)
If your user code has no access to the
ward that is in alarm, using your user
code or proximity tag silences external
and internal sounders, but does not reset
the strobe or other outputs.
ALARM 0002
01:53 Sat 01 Jan
2. The display temporarily shows details of
the alarm, including the zone that
caused the alarm (if appropriate), and
the time and date.
! ALERTS !
01:53 Sat 01 Jan
3. The display shows an ALERTS
message. You must reset the system,
as described on the next page.
To Next Page
Loading...
