10
Unsetting Your Alarm System
To unset the alarm system, go directly to
the keypad and follow the instructions in
one of the two sections depending on
whether the internal sounder is making a
sound.
If the internal sounder is making a sound:
Please Unset
System
1. If the internal sounder is making a tone
and you can see the message shown
opposite then you have started the entry
timer
1
(for example by triggering a
detector that monitors your Final Exit
area). The tone will continue until you
have unset the system.
)
The control unit starts an alarm if you
do not enter a code or present a tag
before the entry timer expires
2
.
2. Enter your user code or present your
proximity tag to the keypad.
The control unit unsets the system.
)
The control unit unsets those wards
assigned to your user code by the system
manager
3
.
1
Engineer option 23
2
External sounders may be delayed by 30 seconds if set in Engineer option 47
3
User option 8-1
To Next Page
Loading...