11
If there is no sound (you have not started the entry timer):
1. Enter your user code or present your
proximity tag to the keypad.
ENT=Unset System
Ward > 12*.....
2. The bottom line of the display shows the
wards that you have access to
1
, and
which ones of these are set and unset.
In this example, you have access to
wards 1, 2 and 3, but only wards 1 and
2 are set.
You can now do one of the following:
To Unset all Wards:
Press [. This unsets all the wards that
are shown as currently set.
To Set an Unset Ward:
Press the number of an unset ward, for
example, press 3 to set ward 3 (see
page 8).
To Unset a Single Ward:
Press the number of a set ward, for
example, press 2 to unset ward 2.
Unset Ward 2?
The display shows the ward you have
chosen to unset. If you want to select a
different ward, use the | or ¬ key. The
bottom line shows the ward’s name if
the system manager
2
has given it one.
Press [ to unset the selected ward.
1
User option 8-1
2
User option 7-2
To Next Page
Loading...
