Need help?Do you have a question about the Cooper SMP 16/CP and is the answer not in the manual?
Process for establishing relationships between internal components and setting specific configurations.
Configures SMP Gateway by specifying devices, protocols, links, and data points.
Adding master protocol instances for each device to access via the SMP Gateway.
Process of defining physical and logical data points for devices connected to the gateway.
Setting up serial and TCP/IP communication links for connecting devices and control centers.
Steps for validating, saving, and sending the SMP Gateway configuration.
Steps to create a slave protocol instance for communication with a control center.
Setting protocol parameters and specifying data points for slave instances.
Selecting data points from master protocol components for slave instances to subscribe to.
Enabling the commissioning tool feature on the SMP Gateway using SMP Config.
Process for activating the commissioning feature via the SMP Gateway's website.
Steps to open a commissioning session after the feature has been activated.
Setting up an Interconnections slave instance on the slave SMP Gateway.
Configuring the Interconnections master instance and importing data points from the slave.
How SMP Gateway meets NERC CIP standards with features like authentication and firewall.
Guidelines for setting up a secure substation LAN and using firewalls.
Steps for customizing security settings, defining users, groups, and policies.
Configuration steps for the Annunciator, including alarm inputs and display pages.
Overview of redundant group operation with active and standby SMP Gateways.
Steps to create a redundancy group using SMP Manager and configure group properties.
Ways to automatically adjust the internal clock using GPS, IRIG-B, SNTP, or SCADA protocols.
Steps for updating SMP Gateway firmware, application, and configuration files.
Troubleshooting common startup issues like missing configuration files or failed protocols.
Diagnosing communication issues by examining physical, link, and protocol layers.
To Next Page
General