Need help?Do you have a question about the Cooper SMP 4 and is the answer not in the manual?
General| Category | Gateway |
|---|---|
| Model | SMP4 |
| Antenna Connector | SMA |
| VoIP Protocols | SIP |
| Ethernet Ports | 1 |
| Power Supply | 12V DC |
| Protocols | TCP/IP, UDP, HTTP, DHCP, ICMP, DNS, NTP, DynDNS, SMTP, POP3, SNMP |
| Dimensions | 74 x 88 x 25 mm |
| Weight | 150 g |
| Ports | 1 x Ethernet, 1 x SIM, 1 x Power, 1 x Antenna |
Covers the security features for protecting substation data and devices.
Details how to create master protocol instances for devices connected to the gateway.
Covers general settings for master protocol components and naming conventions.
Details how to define and configure data points for devices.
Guides on configuring serial ports for RS-232, RS-422, and RS-485 communication.
Explains how to set up serial port parameters like baud rate and parity.
Guides on configuring TCP/IP connections for master protocol components.
Explains how to validate the configuration for errors and save it.
Guides on transferring the validated configuration file to the SMP Gateway.
Guides on creating slave protocol instances for communication with control centers.
Details configuring slave protocol settings and data points for SCADA reporting.
Details configuring TCP/IP and serial links for control center communication.
Guides on setting up TCP/IP connections for slave protocol components.
Guides on validating, saving, sending, and activating the gateway configuration.
Provides guidelines for testing the slave component configuration.
Guides on enabling the commissioning tool feature within the gateway's configuration.
Explains how to activate the commissioning feature via the web interface.
Details the steps to open a commissioning session on the gateway's web interface.
Describes the layout and elements of the commissioning tool's interface.
Guides on forcing input points to specific values for testing purposes.
Details how to perform control operations on output points for validation.
Explains how to deactivate the commissioning feature after use.
Guides on configuring the slave gateway for interconnection with a master.
Details configuring the master gateway to retrieve data from a slave gateway.
Guides on verifying the successful interconnection between two SMP Gateways.
Explains how the SMP Gateway meets NERC CIP cyber security standards.
Provides considerations for setting up a secure substation local area network (LAN).
Offers guidelines for establishing a secure substation LAN environment.
Guides on managing user accounts, groups, and authentication policies.
Outlines the initial steps for customizing SMP Gateway security settings.
Details how to define user authentication requirements and account lockout.
Describes default user groups, privileges, and how to manage them.
Guides on modifying, creating, or deleting user groups and assigning privileges.
Explains how to assign users to groups and manage their access rights.
Guides on validating and saving the security database locally and for transfer.
Details how to transfer the local security database to SMP Gateways.
Explains how to unlock user accounts locked due to failed login attempts.
Explains the process of verifying the authenticity and integrity of gateway files.
Describes how to identify failures in file integrity checks.
Discusses using VPN connections for secure remote access and communication.
Guides on manually establishing a VPN connection to the SMP Gateway.
Details how to configure the SMP Gateway's built-in firewall.
Guides on creating a firewall instance using SMP Config.
Explains the general parameters for configuring the firewall, including VPN connections.
Details how to create firewall rules to control network access.
Explains how to lock and unlock RAS and passthrough connections for security.
Guides on locking or unlocking all incoming RAS dialup connections.
Explains how to lock or unlock individual passthrough connections.
Guides through the steps required to set up passthrough connections.
Details configuring gateway passthrough settings for specific devices.
Details configuring master protocols to retrieve event files from devices.
Details the steps to set up the Annunciator using SMP Config.
Guides on configuring alarm conditions for analog and binary inputs.
Details how to configure the display settings for the Alarms page.
Explains how to create custom pages to display data points and perform controls.
Details uploading the Annunciator configuration file and restarting the gateway.
Details how to manage triggered alarms, including acknowledging and clearing them.
Explains how to block specific alarm inputs to temporarily disable alarm triggering.
Details how to perform control operations using custom touch buttons on readings pages.
Introduces the module for adding local automation capabilities to the gateway.
Details how to define specific automation functions like Best Of or Force.
Explains how to derive data points using mathematical expressions and logic.
Introduces the Soft PLC module and CoDeSys for creating automation scripts.
Guides on creating automation scripts using CoDeSys for the SMP Gateway.
Guides on creating a redundancy group by grouping two SMP Gateways.
Details the process of creating a redundancy group via SMP Manager.
Explains how to configure automatic clock synchronization from external sources.
Guides on updating the SMP Tools software installed on the PC.
Details updating the SMP Gateway's firmware, diagnostics, and application.
Guides on updating the gateway's firmware, including bootstrap programs and Windows CE.
Explains how to update the SMP Gateway application software.
Guides on updating the gateway's configuration file.
Discusses troubleshooting problems occurring at the physical, link, or protocol layers.
Guides on troubleshooting failures when performing control operations.
Explains how to resolve issues caused by incorrectly configured firewall settings.
To Next Page
