4 • SMP Gateway User Manual
1.5 Document Overview
Once you have performed all the steps explained in your SMP Gateway installation guide, you are
ready to perform the following tasks, as described in this user manual:
Configure your SMP Gateway so that it can communicate with your devices:
Define the hardware.
Configure the master protocol instances that will communicate with your substation
devices.
Configure the data points.
Set-up the communications links between the SMP Gateway and the substation devices.
Associate master protocol instances with communications links.
Validate, activate and test your configuration.
View the following information in real time:
The SMP Gateway log files.
Protocol exchanges.
Communications statistics.
Data points, using a Web browser.
Configure your SMP Gateway so that it can communicate with one or more control centers:
Configure a slave protocol instance for each control center.
Have each control center subscribe to the data points.
Associate slave protocol instances with communications links.
You will also become familiar with the following SMP Gateway features:
Security.
Passthrough connections.
DFR and event file processing.
Automation functions.
Annunciator..
Redundancy.
SNMP exporting.
Time synchronization.
SMP Gateway access through a direct or dial-up connection.
SMP Gateway access through a dial-up connection for DNP3 and IEC 60870-5-101
protocols.
Commissioning tool.
To Next Page
Loading...
