Cooper SMP 4 - Updating the SMP Tools on the PC; Updating the SMP Gateway Software; Updating the SMP Gateway Firmware

222 • SMP Gateway User Manual
 Update the SMP Gateway application (see “Updating the SMP Gateway Application”,
page 224).
 Update the SMP Gateway’s configuration file (see “Updating the Configuration File”,
page 225).
The ta
ble below shows the exact order in which you will update the SMP Gateway components,
and the SMP Tool that you will use to perform the update.
Component to update SMP 4 or SMP 16 Tool SMP 4-20/SMP 8-40 Tool
Bootstrap programs SMP Loader SMP Loader
Resident diagnostics SMP Manager SMP Loader
Windows CE SMP Manager SMP Loader
SMP Gateway application SMP Manager SMP Manager
Configuration file SMP Config and SMP Manager SMP Config and SMP Manager
24.2 Updating the SMP Tools on the PC
Whenever you receive a new version from Cooper Power Systems, with a new version or release
of the SMP software and tools, you will start by updating the SMP Tools on your PC. Much more
rarely, you may need to update JRE (Java 2 Runtime Environment).
Proceed as follows:
 Insert the SMP Software and Tools CD-ROM in your computer’s CD drive.
 In the Welcome to the SMP Gateway window, click Upgrading.
 There may be specific instructions that apply to the version you were using previously. If so,
follow these instructions before performing the upgrade.
 Click the item you want to upgrade and follow the instructions.
The SMP Tools installer will automatically remove the previous version before installing the new
one.
24.3 Updating the SMP Gateway Software
24.3.1 Updating the SMP Gateway Firmware
The functions of the SMP Gateway are provided by a sophisticated embedded software system
that includes a number of components: