84 • SMP Gateway User Manual
12.3 Verifying the Interconnection Between the
SMP Gateways
To verify if both SMP Gateways have been properly interconnected:
Launch SMP Manager.
Select the master SMP Gateway (in our previous example, it is the Park Avenue
SMP Gateway).
From the Tools menu, select Internet Explorer. The web browser will connect to the
gateway’s web server (see “Using a Web Browser to View Data in Real Time”, page 59 for
m
ore information about the SMP Gateway’s web features).
If the gateways are correctly interconnected, you will see the slave gateway’s data points in
the browser. Each data point will be preceded by the prefix you defined in the master
gateway’s configuration. If the IEDs are correctly connected to the slave SMP Gateway, the
displayed status of each interconnected data point should be OK.
To Next Page
Loading...
