Cooper SMP 4 - Related Documentation

2 • SMP Gateway User Manual
 The SMP 16/SG has, in addition, expansion slots where accessories and options can be
added to make it an ideal communications gateway for all your automation projects.
 Both versions can also be equipped with the PM option, a new 1.1 GHz Pentium-M
processor that improves the gateway's speed tenfold. This is ideal for high-capacity
application or complex automation schemes.
The manual applies to all models, and differences are indicated where applicable. Refer to your
SMP Gateway installation guide for a detailed description of your particular SMP Gateway model.
1.2 Related Documentation
This manual provides you with the basic information you need to get started with your
SMP Gateway. To reduce paper use, we have included the following related documentation on the
CD-ROM you received with the product. Should you want printed documents, you can order them
from Cooper Power Systems using reference number P-DPRN-0102.
Your Documentation folder contains the following related documents:
 SMP 4-20 SMP 8-40 Installation Guide, GUI-00316-00027 T.
This document gives you detailed instructions on installing and setting up the SMP 4-20 or
SMP 8-40.
 SMP 4 Installation Guide, GUI-00316-00026 T.
This document gives you detailed instructions on installing and setting up the SMP 4.
 SMP 16 Installation Guide, GUI-00316-00032 T.
This document gives you detailed instructions on installing and setting up the SMP 16/CP or
the SMP 16/SG.
 SIOM Adding Serial Ports to Your SMP, AUT-00123-00432 T.
This document describes how to add serial ports to an SMP 4-20 or SMP 8-40.
 SMP 16 GPS Clock Option Installation Guide AUT-00316-0047-T.
This document describes how to install the wiring and setup the software if you have the GPS
clock option for the SMP 16.
 Master Protocol Common Concepts.
This document describes the concepts and settings common to the protocols used by most
substation devices. Separate documents describe the protocol-specific settings.
 SMP 4 Diagnostics Reference Guide, GUI-00316-00040 T.
This document takes you through the steps required to run diagnostic tests on the SMP 4.
 SMP 16 Diagnostics Reference Guide, GUI-00316-00036 T.
This document takes you through the steps required to run diagnostic tests on the SMP 16.
 SMP 4-20 SMP 8-40 Diagnostics Reference Guide, GUI-00316-00024 T.
This document takes you through the steps required to run diagnostic tests on the SMP 4-20
or SMP 8-40.