Cooper SMP 4 - Updating the Configuration File

SMP Gateway User Manual • 225
 Under Program Files\Cybectec\SMP Tools\Manager\SMP Software Libraries, select folder
SMP 16, SMP 4, SMP 4-20 or SMP 8-40, depending on your SMP Gateway model.
 Choose the SMP Gateway application version that you want to send to the SMP Gateway.
The file has the extension “.app” and its name indicates the application version. For example,
a file called SmpApp 1.14R2.app contains version 1.14, release 2, of the SMP Gateway
application.
SMP Manager sends the software to the specified SMP Gateway, and then informs you that you
have to restart your SMP Gateway for the new application to go into effect.
 Simply close the Restart Gateway dialog box, without restarting the SMP Gateway.
24.3.3 Updating the Configuration File
The last step in upgrading to a new version of the SMP Gateway’s software and tools consists of
updating the configuration file:
 Start SMP Config and open your configuration file.
 The file name in the title bar should have a star (*) beside to inform you there is a change.
 From the File menu, click Save.
 A message box will inform you that the current configuration file will be upgraded to a
current version. A backup is automatically saved with the word “backup” before the previous
file’s name.
 Send the configuration file to the SMP Gateway using SMP Manager:
 From the Update menu, select Send configuration file.
 SMP Manager will transfer the file on the SMP Gateway