- 7 -
Acquiring Satellite Signals,
Time Setting and Auto Backlight
Auto Backlight
Acquiring Satellite Signals
Time Setting
BC26 uses GPS for speed tracking, and please make sure the device is outdoor
and under a clear view of sky when using it. Usually it may take 15~90 seconds
for the bike computer to locate satellite signals, remain stationary when
acquiring satellite signals.
The time and date will be calibrated automatically after locate the satellite
signals(Check how to set the time zone correctly, please refer to the time zone
setting chapter).
This device will automatically calculate the sunrise and sunset time, from the
time half an hour before sun set to half an hour after sun rise, the backlight will
be automatically lighted; the backlight will be turned off if no operation
detected in 15 seconds.
To Next Page
