- 8 -
EN
GPS Positioning
Ride
For the initial satellite positioning, please wait 30-90 seconds in an open outdoor area. The date and time of the
device will be set automatically after the initial positioning is successful.
To get the best satellite signal, please ensure that the bike computer remains stationary while it acquires the GPS
signal.
Short press for a 3-2-1 countdown on the data page, begin your ride with the start icon displayed.
Short press to mark a lap after starting ride. Lap displays for 10 seconds; any key press cancels the lap.
Short press to pause the ride. Press again to resume the ride .
If you enable the auto-pause, the ride pauses when you stop moving or when the speed falls below the value you set.
This feature prevents undesired data recording during stops, rests, or while walking the bike.
Long press to save the ride.
Pause/Auto-Pause:
Lap:
Start:
Save:
Press to switch pages and review the data from your last ride.
More Data: Check more detailed activity data on CoospoRide APP.
Check Data:
!
1.
2.
To Next Page
Loading...