5
Maintenance
The amplifier is build for a long lifetime, and no special care needs to be taken apart
from what is already described under installation. However the heart of the amplifier
is the Valves / Tubes and like a light bulb, they have a limited lifetime and can therefore
after a period affect the performance of the amplifier. You should therefore after 4000
playing hours, or if the amplifier changes sound, contact your service agent for replace-
ment of valves.
Warranty and Service
Copland provides a warranty to the first purchaser for a period of one year that the
amplifier will work perfectly. Copland usually commissions the Copland agency in the
country in which the amplifier was purchased to carry out any warranty work.
Following consent from Copland in a particular case, the warranty service may also
be claimed at an agency in another country.
Specifications
Vacuum tubes 6922 (2)
Output Power 2 x 85W channel at 8 Ohms
T.H.D Less than 0,05% at all levels
Power bandwidth 10 Hz – 20 KHz – 0,5dB
Frequency response 10 Hz – 120 KHz – 3 dB
Input sensitivity Phono - 2,7mV ( optional RIAA board )
CD. Line -250 mV
Input impedance Phono - 47 K ohm ( optional RIAA board )
CD. Line - 39 K ohm
S/N ratio ( IHF-A curve ) Phono - more than 80dB
CD. Line - more than 95dB
Power consumption 400W
Dimensions 430 (W) 110 (H) 390 (D) mm.
Shipping weight 15 Kg.
To Previous Page
Loading...