Need help?Do you have a question about the Copland CTA520 and is the answer not in the manual?
Power| rated power per channel | 125W at 8 ohms |
|---|---|
| rated power in bridge operation | 250W |
| power consumption | 600 W |
| nominal mains voltage | 115V or 230V |
Audio Performance| total harmonic distortion (THD) | Less than 0.05% at all levels |
|---|---|
| frequency response | 20-20 kHz – 0.2dB |
| signal-to-noise ratio (S/N) | More than 110 dB |
Input Specifications| input sensitivity | 1.4 V for rated power |
|---|---|
| input impedance (single ended) | 50 Kohms |
| input impedance (balanced) | 50 Kohms |
Weight and Dimensions| dimensions | 430 (W) 86 (H) 390 (D) mm |
|---|---|
| shipping weight | 14 Kg |
Guidance on unpacking, placement, and ventilation requirements for the amplifier.
Details on balanced mono (XLR) and non-balanced stereo (RCA) input types and cabling.
Advice on selecting appropriate speaker wire gauge for optimal sound reproduction.
Button to cycle the amplifier between standby and operation modes.
LEDs indicating Left (CH1) and Right (CH2) channel operation.
Indicators for Safety, Bridge mode, Standby, Power On, DC failure, and Thermal overload.
Connection for the AC power cord and voltage indication.
12V DC-Jack connectors for remote standby/power on functionality.
Switch for selecting between RCA stereo, balanced mono, or bridge mono inputs.
RCA connectors for non-balanced inputs and XLR for balanced mono input.
Terminals for connecting loudspeakers, including bridge mono configuration.
Information on the amplifier's build for longevity and minimal special care.
Details on the one-year warranty and how to claim service.
Key performance metrics including rated power, frequency response, and dimensions.
To Next Page
