Need help?Do you have a question about the Copland CTA405 and is the answer not in the manual?
Audio Specifications| output power | 2x50W |
|---|---|
| speaker impedance | 4 & 8 ohms |
| line input impedance | 50 K ohms |
| phono input impedance | 47 K ohms |
| line sensitivity | 220 mV |
| phono sensitivity | 3 mV |
| frequency response | 5 Hz -100kHz -3dB |
| T.H.D | Better than 0, 4 % |
| signal / noise ( IHF-A ) | Better than 90dB |
| phase | Inverting |
| vacuum tubes | 4 pcs.KT88. 2 pcs.12BH7. 3 pcs.E83CC. 2 pcs.6922. |
Power| power consumption | 250 W |
|---|
Weight and Dimensions| shipping weight | 24 Kg |
|---|
Regulatory agencies require specific information. Please read carefully.
To prevent fire or shock hazard, do not expose this unit to rain or moisture.
Instructions for removing the amplifier from its packaging and initial setup.
Guidance on connecting signal sources and loudspeakers for optimal performance.
Details on the amplifier's power requirements and wall outlet connection.
Selects the appropriate input signal source for playback.
Enables listening to tapes or monitoring recordings during playback.
Switches the amplifier between operation and standby mode.
Control to adjust the volume to the desired listening level.
Details on Tape Out, Tape In, Tuner, CDP, and AUX inputs.
Connections for Phono/RIAA input and 12V remote control.
Specifications for speaker output terminals and grounding.
Mains power connection and ON/OFF indicator.
Guidance on long-term care and potential valve replacement.
Details on the product warranty and service claims.
Key performance metrics including output power and impedance.
To Next Page
