Need help?Do you have a question about the Copland CTA408 and is the answer not in the manual?
Audio Specifications| output power | 2x75W into 3.5 ohms or 8 ohms load |
|---|---|
| nominal speaker impedance | 4 & 8 ohms |
| line input impedance | 50 K ohms |
| phono input impedance | 47 K ohms (MM), 50, 100, 470 Ohms (MC) |
| line inputs sensitivity | 250 mV |
| phono sensitivity | 3.0 mV (MM), 0.26 mV (MC) |
| frequency response | 10 Hz - 80 kHz -3dB |
| T.H.D | Better than 0.9 % |
| signal / noise (IHF-A) | Better than 90dB |
| phase | Non-Inverting |
| overall feedback | 15 dB |
Headphone Amplifier| headphone amp gain | 17.5 dB |
|---|---|
| headphone amp output impedance | 9 ohms |
| headphone amp T.H.D. | Better than 0.05 % |
| headphone amp frequency response | 10 Hz – 200 kHz / -3dB |
Power and Consumption| power consumption | Max.400 W |
|---|---|
| vacuum tubes | 4 pcs. KT150, 2 pcs.12BH7, 2 pcs. 6072A / 12AY7 |
Weight and Dimensions| dimensions | 435mm (w) x 220mm (H) x 460mm (D) |
|---|---|
| shipping weight | 25 Kg |
Essential safety warnings about electrical shock, moisture, and internal components.
Guidelines for ensuring proper airflow and preventing overheating.
Detailed steps for installing and aligning the KT150 power tubes correctly.
Guidance on connecting signal sources using shielded cables to minimize hum.
Information on connecting the amplifier to the appropriate AC power outlet.
Controls for input selection and tape monitoring features.
Display and power switch for monitoring and controlling the amplifier.
Volume control and headphone jack for listening experience.
Inputs for turntables (MM/MC) and the ground terminal.
Analog inputs and tape recorder connections for audio sources.
Terminals for speaker output and AC power input.
Information on the expected lifetime of vacuum tubes and their operation.
Details on the type and value of the internal fuse.
Details on the warranty period and how to claim service.
Key performance data including output power, impedance, and frequency response.
Lists the types and quantities of vacuum tubes used in the amplifier.
Dimensions and shipping weight of the amplifier.
To Next Page
