Xenus Regeneration Guide Regen Resistor Sizing and Configuration
Copley Controls Corp. 15
A.2.2.4 Enter a Continuous Power within the range described. Click Next for Step 3.
A.2.2.5 Enter a Peak Power within the range described. Click Next for Step 4.
A.2.2.6 Click Next for Step 5.
A.2.2.7 Review the configuration.
A.2.2.8 Click Finish to save the configuration to volatile and flash memory and close the
screen
OR
click Prev to modify any values
OR
click Cancel to close the screen without saving any changes.
To Next Page
Loading...
