2KZ/2K0-5
1-3-125
U905 Checking counts by optional devices
Description
Displays the counts of document processor or document finisher.
Purpose
To check the use of document processor or document finisher.
Method
1. Press the start key.
2. Select the device to be checked. The count of the selected device is displayed.
DP
DF
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U910 Clearing the print coverage data
Description
Clears the accumulated data for the print coverage per A4 size paper and its period of time (as
shown on the service status report).
Purpose
To clear data as required at times such as during maintenance service.
Method
1. Press the start key.
2. Select [Execute].
3. Press the start key. The print coverage data is cleared.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Item No. Description
Display Description
DP Counts of document processor
DF Counts of document finisher
Display Description
ADP Counts of single-sided originals that has passed through the DP
RADP Counts of double-sided originals that has passed through the DP
Display Description
Sorter Counts of copies that has passed through the sorter
Staple Frequency the stapler has been activated
To Next Page
Loading...
