Need help?Do you have a question about the Corally TOROX 185 and is the answer not in the manual?
Connects ESC wires to the motor, handling reverse rotation if needed.
Connects ESC and servo cables to the receiver's throttle and steering channels.
Details correct connection of ESC power cables to the battery, emphasizing polarity.
Selects vehicle operation: Forward+Brake or Forward+Reverse+Brake.
Configures LiPo battery cell count detection for optimal ESC performance.
Sets the low-voltage cutoff threshold to protect batteries.
Sets the ESC's auto-protection temperature limit to prevent overheating.
This feature is permanently set to Disabled.
Allows adjustment of the motor's spin direction (CCW or CW).
Selects the BEC output voltage (6.0V or 7.4V) for servos.
Adjusts the proportional braking effect based on throttle trigger position.
Determines the speed of the vehicle's reverse function.
Configures throttle acceleration rate from soft to aggressive.
Simulates slight braking when throttle returns to neutral.
Guide to programming ESC settings using the SET button and LEDs.
Procedure to restore ESC to default factory settings using the SET button.
Explains LED indications during operation and protection modes.
General| Brand | Corally |
|---|---|
| Model | TOROX 185 |
| Category | Controller |
| Language | English |
To Next Page