USING COOKER SECTION
Using Gas Burners:
Closed
Fully open
Half open
1.In order to obtain maximum output, be careful that the saucepan which
will be used should be flat bottomed, and use the saucepans with
dimensions given herein above.
2.The valves controlling the gas cookers have special security mechanism.
In order to light the cooker;
Always press on the switch forward and bring it to flame symbol by turning
counterclockwise. All of the lighters shall operate and the cooker you
controlled shall light only. Keep the switch pressed until ignition is
performed. Press on the lighter button and turn the knob counter
clockwise.
3.Do not continuously operate the igniter for more than 15 seconds. If the
burner does not ignite, wait minimum one minute before try again. If the
burner is extinguished because of any reason, close the gas control valve
and wait minimum one minute before try again.
4.In models with Gas Security System, when flame of the cooker is
extinguished, control valve cuts off the gas automatically. For operate the
burners with gas security system you must press the knob and turn
counter-clock-wise. After the ignition you must wait nearly 5-10 second for
gas security systems activation. If the burner is extinguished for of the any
reason, close the gas control valve and wait a minimum of one minute
before trying again.
Using Hot Plates:
To Next Page
Loading...
