CORBERO CC4060WB - Gas Cock Adjustment; Reduced Flame Gas Cock Adjustment

Reduced Flame Gas Cock Adjustment:
In order to adjust your oven to the gas type, make the adjustment for
reduced flame carefully by turning with a small screwdriver as shown below
on the screw in the middle of the gas cocks as well as nozzle changes.
For oven burners:
1.Please remove nut from on nozzle body with nutdriver and disconnect
gas pipe from body as Figure-6 and 7.
2.Please remove nozzle body and burner from cavity as Figure -8/9 and
remove nozzle from injector body (Figure-10/11) and change. Than re-
install nozzle body and burner on cavity by screws.
From LPG to NG
From NG to LPG
Rapid Burner
3 Turns Counterclockwise
3 Turns Clockwise
Semi-Rapid Burner
2.5 Turns Counterclockwise
2.5 Turns Clockwise
Auxiliary Burner
2 Turns Counterclockwise
2 Turns Clockwise
WOK Burner
4 Turns Counterclockwise
4 Turns Clockwise
Oven Burner
4,5 Turns Counterclockwise
4,5 Turns Clockwise
Grill Burner
4 Turns Counterclockwise
4 Turns Clockwise
GB
6
Figure-4 Figure-5