CORBERO CCHMT903N - Product Introduction; Control Panel Introduction

PRODUCT INTRODUCTION
When removing food, please wear heat insulating gloves to prevent burns!
At the moment of opening the door of the furnace, pay attention to thesteam. Please
open the door at a small Angle to avoid the steam on your face.
Control Panel introduction
EN-8
Control panel
Mounting fixing hole Mounting fixing hole
Handle
Glass door
Ventilating openings
Time Setting
K1: For selecting oven functions.
K2: For setting the temperature.
Time Setting: For adjusting the cooking time.
As the product is constantly upgraded, if there is any dierence between the real object
and the picture below, please refer to the real object.