MAINTENANCE
If you cannot deal with the problems by yourself and need help:
• Press the On/Off button.
• Pull out the mains plug and call the service.
！
Warning!
• Clean lint filter and heat exchanger.
• Empty the water container.
• Check the drain hose.
• Check installation place is appropriate.
• Keep the air inlet clean.
• Use higher drying intensity level
programme or time programme.
“ ”is lighting
Problem
Solution
Display is not on
• Check if the power supply works.
• Check if the mains plug is inserted.
• Check the selected programme.
• Press the On/Off button.
• Check the water container. If it's full,
please pour out the condensate water
and restart the dryer. If the container is
not full, please restart the dryer directly.
• If the icon is still lighting after you have
finished the first two steps, please call
the service.
• Clean the lint filter.
Dryer does not start
• Connect the tumble dryer to the mains.
Turn on the tumble dryer.
• Check that the door is closed.
• Check the programme is set.
• Press the Inicio/Pausa button.
Degree of dryness
was not reached or
drying time too long
"
/
F
ul
” icon is on.
26
V.1
To Next Page
Loading...
