Do you have a question about the CORBERO LDE1400 and is the answer not in the manual?
Instructions for removing transport security bars before first use.
Guidance on connecting the water supply and drainage systems.
How to adjust the appliance feet for proper stability and reduced vibration.
Checks and requirements for safe electrical connection to the mains.
Description of the main control panel elements and indicators.
Details on the dispenser compartments for prewash, wash, and additives.
Explanation of the indicator light for appliance operation.
How to select and use the program selector for washing cycles.
Explanation of buttons like '1/2 Load', 'Cold Wash', '800/500', 'Rinse Hold'.
How to adjust the wash temperature according to fabric type.
Guidance on loading laundry loosely and avoiding overload.
Instructions for adding detergent to the correct dispenser compartment.
How to add softener and bleach to the appropriate compartments.
How to select the desired wash temperature using the dial.
How to turn the program selector dial to choose a cycle.
Steps to take before pressing the start button and initiating the program.
How the machine stops automatically and post-cycle actions.
Advice on correctly loading the washing machine for optimal results.
Recommendations for selecting wash temperatures based on fabric types and soil levels.
Explanation of common care label symbols for washing, bleaching, ironing, and drying.
Instructions for cleaning the exterior cabinet of the appliance.
Steps to remove and clean the detergent dispenser and its housing.
Procedure for cleaning the drain filter to ensure proper machine function.
How to clean the filter in the water inlet hose if filling time is prolonged.
Precautions to take if the machine is exposed to temperatures below 0°C.
Checks to perform if the washing machine fails to start.
Troubleshooting steps for when the machine does not fill with water.
Diagnosing the issue where the machine empties while filling.
Checks to perform if the machine fails to drain or spin.
Common causes and checks for leaks or overflows from the washing machine.
Troubleshooting causes for excessive vibration or noise during operation.