02
SECTION 01
THESE NOTES MUST BE READ BEFORE USE
These instructions are for your safety. Please read through them thoroughly
before use and retain for future reference. Failure to follow them could cause
injury and/or property damage.
Before operation please check contents thoroughly and contact your supplier if any
parts are missing or damaged. Please dispose of all product packaging responsibly
A BRIEF HISTORY...
Corby is an iconic brand of Britain, starting life as John Corby Limited in England in 1930
as a manufacturer of valet stands. Later improvements included the addition of a
pressing area and the first Corby trouser press was launched. These subsequently
became electrically heated during the 1960's, and the Corby Trouser Press we know
and love today was born. After a period in Andover, Hampshire, in 2009 John Corby
Limited became part of Fired Up Corporation Ltd and the company relocated to
Huddersfield.
We are proud of our long and extraordinary history. It's part of our identity and part of
what makes us unique. We continue to manufacture the world famous trouser press at
home in the United Kingdom, along with a wide range of high quality in-room amenities
for the hotel, commercial and leisure industries.
Each press is hand assembled and individually tested prior to dispatch from our factory.
CONTENTS
SECTION 01
Cautions 03-04
Important 04
SECTION 02
Introduction 05
Identification 05
SECTION 03
Assembling the Trouser Press 06
Wall Mounting 07-08
Electrical Connections 08
Operating Instructions 09
Cleaning and Maintenance 10
Specification 10
Contacts 10
To Next Page
Loading...
