CHAIR INSTALLATION CHAIR INSTALLATION
Insert the controller stand into the right armrest hole.
Use the enclosed screw to secure into place.
Insert the backrest cushion into the backrest and zip to
close. Connect the velcro on the bottom of the backrest
cushion to the seat casing.
Connect the backrest cushion air hose to the main body.
Place the pillow on the backrest. Connect the
velcro on the backrest cushion to the backrest.
Connect the heating air hose to the seat cushion
of the main body.
Connect the velcro of the seat cushion to the seat
casing.
Insert the controller cord into the controller port on the back of the chair.
Insert the controller into the
controller stand.
right armrest hole.
controller stand hole
controller port
Connect the massage chair cord to a
working power outlet.
Turn the power switch on the back of the
chair to the “on” position.
Press the power button on the controller
to turn on the massage chair.
controller stand
power switch
STEP 8: Install the Controller Stand. STEP 11: Assemble the cushions and pillow.
STEP 12: Turn on the massage chair.
STEP 9: Install the Controller.
STEP 10: Assemble the Controller.
11 12
To Next Page
Loading...
