6
Step 1: Connect the Main Antenna and Motor
Step 2: Attach Your Antenna to the J-Pole
Step 3: Connect Your Antenna
Align the motor with the main unit and secure
them in place with the carriage bolt
3
and
wing nut
4
.
Place your antenna & motor assembly onto the
J-pole
10
, and tighten the column until your
antenna is secure.
Tip: Keep a 20-inch clearance around your
antenna so it can rotate properly.
Using the included coaxial cable
7
, connect your antenna to the antenna
input on the power supply box
5
. Connect the box to a power source (i.e.
an electrical outlet) using the included wall adapter.
If your TV has a digital tuner, simply connect the power supply box output
cable directly to your TV’s cable input port.
If your TV does not have a digital tuner, connect the power supply box
output cable to your digital converter box, and then connect your converter
box output cable to your TV.
Connect the coaxial signal line from the motor
to the main unit and tighten the fastener.
To Next Page
Loading...
Need help?
General