7
To perform a TV channel scan:
• Set the tuner mode to “Antenna” or “Air” on your TV’s setup menu.
• Set your TV to scan for channels. This may be listed as auto-program,
auto-scan, channel search or channel scan.
Move and rotate your antenna, and note which locations receive the most
channels and best channel reception. Use the included remote to rotate
your antenna to the desired position
Note: Running a channel scan is not the same as pressing Channel UP/
DOWN on your remote.
• Refer to your TV’s user manual for further details.
Note: You must re-scan for channels anytime you move or reposition your
antenna.
Step 4: Scan for Channels
To Next Page
Loading...
Need help?
General