Contents
1 Introduction 5
1.1 Overview 5
1.2 About this Manual 5
2 Installation Guide 6
2.1 Package Contents 6
2.2 System Requirements 6
2.3 Recommended Software 6
2.4 Device Description 7
2.5 Multiplug Adapter Assembly 9
2.6 Technical Specifications 10
2.7 Factory Default Modem Configuration 11
2.8 Installing the Corinex HD200 CableLAN Wall Mount 11
3 Starting Up the Modem 14
4 Configuring the DHCP / TFTP Server 15
5 Providing an IP Address 21
6 Writing an Auto-configuration File 23
7 Device specific parameters 24
7.1 Enable/disable multicast aging 24
7.2 Enable/disable interface EXTA 24
7.3 Show all MAC addresses for interface EXTA 25
7.4 Node number 26
8 Troubleshooting Guide 27
4
Contents
Corinex HD200 CableLAN Wall Mount
To Next Page
Loading...
