Corken B166 User Manual

Installation, Operation
& Maintenance Manual
Models B166 and T166 External Automatic
Bypass Valves
Model B166 External
Automatic Bypass Valve
Model T166 External
Automatic Bypass Valve
Solutions beyond products...
Warning: (1) Periodic inspection and maintenance of Corken products is essential. (2) Inspection, maintenance and installation of Corken products
must be made only by experienced, trained and qualied personnel. (3) Maintenance, use and installation of Corken products must comply with
Corken instructions, applicable laws and safety standards (such as NFPA Pamphlet 58 for LP-Gas and ANSI K61.1-1972 for Anhydrous Ammonia).
(4) Transfer of toxic, dangerous, ammable or explosive substances using Corken products is at user’s risk and equipment should be operated
only by qualied personnel according to applicable laws and safety standards.
ORIGINAL INSTRUCTIONS IH100G

Corken B166 Specifications

General

Brand	Corken
Model	B166
Category	Control Unit
Language	English

Summary

ATEX Conformity Notices

ATEX Product Classification and Application

Details on ATEX classification, intended use, and potential misuse.

Technical Guidelines for ATEX Compliance

B166 External Automatic Bypass Valve

Chapter 1: B166 Installation

Guide for proper installation of the B166 external bypass valve.

B166 Operation

Instructions for setting the differential pressure of the B166 bypass valve.

T166 External Automatic Bypass Valve

Chapter 2: T166 Installation

Guide for proper installation of the T166 external bypass valve.

T166 Operation

Instructions for setting the differential pressure of the T166 bypass valve.

Appendix B: Specifications

Appendix C: Performance Curves

Appendix D: Outline Dimensions

Appendix E: Parts Details

B166 Parts Breakdown

T166 Parts Breakdown