Cornell CTP-E35P - How to Use

5
How to Use
Opening Top Lid
 Push down front edge of LID OPENING LEVER located at the lid.
Press and lift up the lid opening lever to open the top lid. Water may
still be hot and hot vapor may escape. (Figure 1)
Figure 1
Removing & Reinstalling Top Lid
 Lift the top lid to an angle at about 45, press the UNLOCK button
located at the rear of the top cover and pull upwards at 45. (Figure 2)
 Align the metal pivot shaft to the hinge of the lid and press the
UNLOCK button again to allow the lid back into place. (Figure 3)
Figure 2 Figure 3
Open
UNLOCK Button
Metal Pivot
Shaft