To Next PageTo Next Page
Need help?Do you have a question about the CORNING DE2-CCA-1PR18-2M and is the answer not in the manual?
General| Brand | CORNING |
|---|---|
| Model | DE2-CCA-1PR18-2M |
| Category | Network Hardware |
| Language | English |
Connects the Virtual Application Host to the network using CAT6 jumpers and console cables for router configuration.
Connects the SDDP TOR switch to the Virtual Application Host and network using SFPs and console cables.
Connects application controllers to the SDDP TOR switch using appropriate SFPs and jumpers for management.
Connects Virtual Application Host to external router and SDDP TOR switch via RJ45 and console cables.
Connects power, SFPs, and console cables to the SDDP TOR switch for network connectivity from an external router.
Connects application services from an external router to the SDDP TOR switch using SFPs and jumpers.
Connects Active Ethernet to the SDDP TOR switch using bi-di SFP, attenuator, and fiber jumpers.
Connects Active Ethernet using SDDP Aggregation Switch via SFPs and duplex jumpers for network access.
Connects OLT to Head End equipment rack and SDDP TOR switch with power and appropriate SFPs.
Connects PSU6 and PSM-I modules to power source and equipment using cross-connect assemblies.
Sets up fiber hardware enclosures (CCH) in the rack using Unicam or Fuselite connectors and jumpers.
Uses CCH Pigtailed Splice Cassettes to interconnect Head Equipment and outgoing fiber cables.
