Cornwell Tools CAT4150

To Next Page

1CAT4150 Rev. 06/04/10

Operating Instructions • Warning Information • Parts Breakdown

Some dust created by power sanding, sawing, grinding, drilling, and other

construction activities contains chemicals known to cause cancer, birth

defects or other reproductive harm. Some examples of these chemicals are:

 • leadfromlead-basedpaints,

 • crystallinesilicafrombricksandcement

and other masonry products, and

 • arsenicandchromiumfrom

  chemically-treatedlumber.

Your risk from these exposures varies, depending on how often you do this

type of work. To reduce your exposure to these chemicals: work in a well

ventilated area, and work with approved safety equipment, such as those

dust masks that are specially designed to ﬁlter out microscopic particles.

Breakaway Torque: .......................... 1,200 Ft./Lbs.

Maximum Applied Torque: ................. 800 Ft./Lbs.

Working Torque Range: ............... 50 - 550 Ft./Lbs.

Free Speed: ........................................... 7,500 RPM

Avg. Air Consumption: .............................. 4.9 cfm

Overall Length: ............................................ 6-7/8"

Weight: .......................................................... 4 lbs.

Sound Level: ............................................ 97.3 dBA

Air Inlet (NPT): ................................................. 1/4"

Recommended Hose Size: ............................... 3/8"

SPECIFICATIONS

CAT4150

Super Duty 1/2" Dr.

Composite Impact

Wrench

RATED RPM OF THE ACCESSORY

USED MUST EXCEED THE MAXIMUM

TOOL RPM SHOWN

ALWAYS READ

INSTRUCTIONS BEFORE

USING POWER TOOLS

ALWAYS WEAR

SAFETY GOGGLES

WEAR HEARING

PROTECTION

AVOID PROLONGED

EXPOSURE TO

VIBRATION

Need help?

Do you have a question about the Cornwell Tools CAT4150 and is the answer not in the manual?

Summary

Specifications

Safety Warnings

Dust Exposure Precautions

Warning regarding dust from construction activities containing chemicals known to cause cancer, birth defects, or reproductive harm.

Operational Safety Precautions

Essential safety guidelines for operating air tools to prevent injury, including eye, hearing, and body protection.

Operation and Maintenance

Operation

Instructions for adjusting torque, typical usage, and fastener tightening procedures for the impact wrench.

Air Supply Requirements

Guidelines for air pressure, hose size, and air quality to ensure tool performance and longevity.

Lubrication

Procedures for daily lubrication of the air tool using quality air tool oil to maintain performance.

Warranty Information

Parts Breakdown