What to do if Cornwell Tools CSESJ350A unit will not lift to full height?
If the Cornwell Tools Jacks unit does not lift to its full height, purge air from the hydraulic system. Follow the air purging procedure detailed under the SETUP section.
How to fix Cornwell Tools Jacks that won't sustain rated load?
If your Cornwell Tools Jacks unit will not sustain the rated load, or feels spongy under the rated load, purge air from the hydraulic system. Use the procedure described in the SETUP section.
What to do if Cornwell Tools CSESJ350A Jacks will not lift rated load?
If the Cornwell Tools Jacks unit will not lift the rated load, purge air from the hydraulic system. Refer to the SETUP section for the correct procedure.
Crucial safety instructions to read and understand before using the device.
Explains inherent hazards associated with portable automotive supporting devices.
Provides essential steps and precautions to prevent accidents and injuries during operation.
Details the severe outcomes of failing to adhere to safety guidelines and procedures.
General| Model | CSESJ350A |
|---|---|
| Category | Jacks |
| Capacity | 3.5 tons |
| Saddle Height (Max) | 21.5" |
| Handle Length | 50" |
To Next Page
