To Next PageTo Next PageHow to fix a Cornwell Tools Jacks that won't lift its rated load?
If your Cornwell Tools Jacks unit isn't lifting its rated load, you should purge air from the hydraulic system. Follow the procedure outlined under the SETUP section to complete this process.
What to do if Cornwell Tools Jacks feels spongy or won't sustain load?
If your Cornwell Tools Jacks feels spongy or fails to sustain its rated load, the solution is to purge air from the hydraulic system. Refer to the SETUP section for the correct procedure.
Specifies the maximum load capacity of the transmission jack.
Indicates the highest reach of the transmission jack.
States the lowest position of the transmission jack.
Defines the range of forward and backward tilt for the saddle.
Specifies the lateral tilt capability of the saddle.
Details the dimensions of the jack's base.
Specifies the air pressure needed for operation.
Indicates the weight of the jack itself.
States the weight of the jack for shipping purposes.
Explains the purpose of the safety alert symbol for hazard warnings.
Defines the 'WARNING' indicator for hazardous situations.
Emphasizes reading and understanding all instructions before use.
Discusses inherent hazards of portable automotive supporting devices.
Provides critical steps to prevent hazardous situations during operation.
Outlines the severe outcomes of not following safety procedures.
Details checks required before using the jack.
Guides on assembling and preparing the jack for use.
Instructions for removing trapped air from the hydraulic system.
Recommendations for regular maintenance to ensure longevity.
Advice on storing the jack to protect it from damage.
Outlines the duration and scope of the product warranty.
Provides instructions on how to seek warranty support.
Specifies conditions not covered by the warranty.
Specifies the maximum load capacity of the transmission jack.
Indicates the highest reach of the transmission jack.
States the lowest position of the transmission jack.
Defines the range of forward and backward tilt for the saddle.
Specifies the lateral tilt capability of the saddle.
Details the dimensions of the jack's base.
Specifies the air pressure needed for operation.
Indicates the weight of the jack itself.
States the weight of the jack for shipping purposes.
Explains the purpose of the safety alert symbol for hazard warnings.
Defines the 'WARNING' indicator for hazardous situations.
Emphasizes reading and understanding all instructions before use.
Discusses inherent hazards of portable automotive supporting devices.
Provides critical steps to prevent hazardous situations during operation.
Outlines the severe outcomes of not following safety procedures.
Details checks required before using the jack.
Guides on assembling and preparing the jack for use.
Instructions for removing trapped air from the hydraulic system.
Recommendations for regular maintenance to ensure longevity.
Advice on storing the jack to protect it from damage.
Outlines the duration and scope of the product warranty.
Provides instructions on how to seek warranty support.
Specifies conditions not covered by the warranty.
General| Brand | Cornwell Tools |
|---|---|
| Model | CTJTJ1KA |
| Category | Jacks |
| Language | English |
