What to do if my CORRECT CRAFT Boat engine runs but makes little or no progress?
If your CORRECT CRAFT Boat's engine runs but the boat isn't moving or making little progress, check for a fouled or damaged propeller. Also, there might be an engine problem.
Why does my CORRECT CRAFT Boat have poor performance?
If your CORRECT CRAFT Boat has poor performance, it might be due to contaminated fuel, a clogged fuel filter, or uneven load distribution. Other potential issues include improper propeller selection, marine growth on the hull, or an engine problem.
Why is my CORRECT CRAFT Boat experiencing excessive vibration?
If your CORRECT CRAFT Boat is experiencing excessive vibration, it could be due to a damaged or fouled propeller, a misaligned propeller shaft coupling, or a bent propeller shaft. An engine problem could also be the cause.
What to do if my CORRECT CRAFT Boat engine will not start?
If your CORRECT CRAFT Boat's engine won't start, make sure the emergency stop switch is in place and that you are following the correct starting procedure. Also, check that the fuel tank isn't empty.
Why does my CORRECT CRAFT Boat have poor gas mileage?
If your CORRECT CRAFT Boat has poor gas mileage, check for marine growth on the hull or an engine problem.
What causes shifting problems in a CORRECT CRAFT Boat?
If you are experiencing shifting problems with your CORRECT CRAFT Boat, check the transmission fluid level. Also, inspect for a sticking transmission shift lever or a bad wire connection in the shifting harness.
How to troubleshoot a CORRECT CRAFT Boat when the starter motor will not operate?
If your CORRECT CRAFT Boat's starter motor won't operate, ensure the shift handle is in NEUTRAL. Also, check that the Battery Selector switch is not OFF and inspect the battery and electrical connections for looseness or corrosion.
What causes throttle problems in a CORRECT CRAFT Boat?
If you're having throttle problems with your CORRECT CRAFT Boat, check the throttle wire harness to ensure it's not loose or unplugged at both the throttle and the engine. Also, inspect the throttle return spring for defects.
What to do if CORRECT CRAFT Boat lights are dim or not working?
If your CORRECT CRAFT Boat's lights are dim or not working, check if a circuit breaker has tripped or is in the OFF position. Additionally, verify if the battery is discharged.
What causes steering problems in a CORRECT CRAFT Boat?
If you're facing a steering problem with your CORRECT CRAFT Boat, it might be due to a corroded steering cable or a worn rudder.
Essential safety rules and precautions for all boat operations.
Critical steps to perform before launching and while underway.
Guidelines for handling emergencies such as fire, capsizing, or medical issues.
Detailed technical data for each Nautique boat model, including dimensions and capacities.
Identification of controls, features, and seating arrangements per model.
Operation of critical helm controls for safe boat management.
Using the keyless ignition, keypad, and associated modes for boat functions.
Explanation of electrical systems, ballast management, and bilge pump functions.
Details on fuel tank, fills, vents, filters, and related maintenance.
Crucial checks to perform before starting the engine and operating the boat.
General| Brand | CORRECT CRAFT |
|---|---|
| Model | super air G25 2018 |
| Category | Boat |
| Language | English |
To Next Page