Need help?Do you have a question about the Corsair AF120 RGB SLIM and is the answer not in the manual?
General| Fan Size | 120mm |
|---|---|
| Airflow | 56.3 CFM |
| Connector | 4-pin PWM |
| Dimensions | 120mm x 120mm x 15mm |
| Bearing Type | Fluid Dynamic Bearing |
| Voltage | 12V |
| Static Pressure | 1.9 mm-H2O |
| RGB | 8 individually addressable LEDs |
Turn your system off prior to installing your AF120 RGB SLIM fan.
Locate and mount the Lighting Node CORE, ensuring fan RGB LED cables can reach it.
Mount the AF120 RGB SLIM inside your case with the provided short mounting screws.
Connect the 4-pin RGB connectors from your AF120 RGB SLIM fans into the Lighting Node CORE controller.
Plug the 9-pin USB cable from the Lighting Node CORE into an available internal USB 2.0 header.
Connect the 4-pin PWM connector into an available 3-pin* or 4-pin fan header.
Click the image to download CORSAIR's latest iCUE software.
Once iCUE is installed, select the "8-LED fan Series" in the Lighting Setup page under Lighting Node CORE.
Please visit our CORSAIR LAB YouTube channel for more tips and instructions on how to get the most out of your new CORSAIR fans.
To Next Page